- AutoBackupCoordinator: add 55s debounce to onActive() so repeated .task
and scenePhase triggers (navigation appear, rapid foreground cycles) are
no-ops; start a 60s periodic recheck timer on first active call; stop timer
and reset debounce on willResignActiveNotification so each new foreground
session always gets an immediate fresh status check
- BackupView: remove the redundant lanMonitor.nasReachable onChange that was
calling statusService.refresh() directly — coordinator already handles this
via its Combine $nasReachable subscriber, avoiding a double reconcile that
could bypass the autoBackupOnOpen gate with the wrong lastTriggerWasLAN value
- BackupStatusService: when NAS connect fails, restore nasArchiveTotal from
NASManifestCache before writing the offline snapshot — prevents the count
from showing 0 when the NAS is temporarily unreachable but the cache is warm
- BackupStatusService: manifest validity check — if the decoded manifest has
≤ 1 entries (corrupt or newly created), scan the NAS directory and use the
real file count as the display floor for nasArchiveTotal without adding
orphan entries to the manifest (that was the 7421 regression)
- BackupManifest: add ManifestIndex.init(manifest:overrideTotalCount:) for
the validity check path — keeps localIdentifier matching intact while
correcting the displayed archive count
- SMBService: add os.log around connect/auth/listDirectory with actual error
reason instead of always surfacing authenticationFailed; distinguish network
errors (timeout, host unreachable) from auth errors in thrown BackupError
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
- LocalPhotoIndex: add count(filter:) so fast-path reconcile uses the
filtered asset count as phoneTotal instead of the unfiltered totalCount;
fixes the broken alreadySafe + needBackup == phoneTotal invariant
- BackupStatusService: fast-path uses count(filter:) instead of totalCount;
writeManifest falls back to NASManifestCache when NAS download fails so
accumulated history is never silently discarded on a flaky connection
- ConnectionStore: autoBackupEnabled defaults false; new autoBackupOnOpen
(default false) separates LAN-join auto-backup from app-open auto-backup
- AutoBackupCoordinator: onActive(lanTriggered:) tracks trigger source;
handleReconciliationComplete gates on autoBackupEnabled for LAN joins and
autoBackupOnOpen for app-open — prevents backup starting on every launch
- SettingsView: split auto-backup into two toggles with accurate descriptions
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Root cause: ManifestIndex.isFilenameOnly is false as soon as any single entry has a
localIdentifier. All filename-only entries (orphans uploaded in prior sessions without
a saved localIdentifier) are never matched, so their assets appear pending on every
reconcile and the backup re-starts from scratch on every app open.
Fix: add unclaimedFilenames set — filenames of entries with localIdentifier: "".
Use this as a targeted fallback in countSafe / pendingIDs / BackupEngine filter:
an asset not matched by localIdentifier is still considered safe if its filename
matches an unclaimed entry. This is safe because unclaimed entries are specifically
files we know are on NAS but whose identity we can only track by name.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
- writeManifest now updates NASManifestCache after every successful NAS write;
previously the fast-path reconcile would read the pre-backup cache entry
(e.g. 1 entry) and overwrite nasArchiveTotal / alreadySafe with stale values
- BackupEngine seeds NASManifestCache when it loads the manifest so the cache
is always at least as fresh as what the engine sees at backup-start time
- Remove snapshot.nasArchiveTotal += uploaded from refreshAfterBackup; the
correct total comes from the merged manifest written to NAS, not an additive
delta from a potentially-wrong baseline
- Fix JSONDecoder() → JSONDecoder.kisani throughout manifest load paths so
ISO8601 dates decode correctly instead of silently failing and returning nil
- Add retry with exponential backoff (max 3 attempts, 2 s / 4 s intervals)
to the upload loop; permanently-failed items are now marked .failed only
after all retries are exhausted
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Cached indexes:
- NASManifestCache: actor-based disk cache for the NAS manifest (kisani_manifest_cache.json)
Avoids NAS network round-trip when cache < 5 min old. Updated after every manifest download.
- LocalPhotoIndex: actor-based disk cache of phone asset metadata (kisani_local_index.json)
Built once on first launch, then updated incrementally via PHPhotoLibraryChangeObserver.
O(1) countSafe via in-memory dict (vs PHFetchResult batch enumeration + CoreData calls).
Fast path reconcile:
When both caches are warm, reconcile() skips NAS connection + PHFetchResult enumeration
entirely and returns in microseconds. Falls through to full NAS path only when stale.
AutoBackupCoordinator.onActive():
Changed force: true → force: false so the 30-second debounce prevents expensive rescans
on rapid app foreground/background cycles. Dashboard appears instantly from cached snapshot.
BackupQueueItem + queue tracking:
BackupEngine publishes queueItems: [BackupQueueItem] with per-file status, progress,
speed, error details. Queue is persisted to disk and reloaded on next launch so SyncView
always has data to show even after restart.
NotificationService:
Centralised local notification sender replacing the inline UNMutableNotificationContent
blocks. Sends for: backup started, completed, failed, paused, NAS offline. Uses category
identifiers so same-type notifications replace each other.
SyncView redesign:
- Removed pill/chip around NAS IP — replaced with plain "Online/Offline/Checking" dot+text
- No live NAS directory listing (was expensive NAS connection on every tab open)
- Shows engine.queueItems grouped into Active / Failed / Completed sections
- Per-file rows with inline progress bar + bytes/speed for uploading items, error text for failed
- Idle state shows archive count from statusService snapshot
GalleryViewModel:
NAS tab and All tab now use NASManifestCache as fallback when statusService.lastManifest
is nil (offline launch). Gallery shows NAS items even when NAS is unreachable.
AppDelegate:
Bootstraps LocalPhotoIndex.loadOrBuild() in background on launch (non-blocking).
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
BackupEngine:
- fetchAssets() runs in Task.detached — prevents 100-500ms UI freeze during
PHFetchResult enumeration on large libraries
- Manifest JSON decode + ManifestIndex Set construction run in Task.detached
- pendingAssets filter runs in Task.detached — O(N) array filter off main thread
- Progress updates throttled to 8 Hz via ProgressThrottle — eliminates the
continuous SwiftUI full-tree redraws caused by per-byte upload callbacks
- bytesSoFar captured by value in upload closure — avoids mutable var capture
- reserveCapacity on manifestEntries array
- os_signpost intervals on FetchAssets, NASConnect, ManifestLoad,
BuildPendingQueue, UploadLoop, UploadFile for Instruments profiling
BackupStatusService:
- countSafe() marked nonisolated — runs in Task.detached off main actor,
keeping touch/animation responsive during PHFetchResult batch enumeration
- ManifestIndex JSON decode + Set construction run in Task.detached
- Bootstrap ManifestIndex(nasListing:) construction off main actor
- writeManifest JSON decode/encode/merge off main actor
- os_signpost intervals on Reconcile, ManifestLoad, CountSafe
Model types:
- ManifestIndex, ManifestEntry, PhotoAsset, BackupFilter marked Sendable —
safe to pass across task boundaries without warnings
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
- BackupEngine: pre-filter assets against ManifestIndex before job.start() so
totalFiles reflects only pending items (not full gallery). Short-circuit with
allAlreadySafe() when queue is empty.
- BackupJob: add resolveSuccess() (upgrades stale .failed → .completed after
reconciliation proves needBackup==0) and allAlreadySafe() for empty-queue case.
- BackupStatusService: expose refreshAndWait(force:) async for pull-to-refresh
and post-failure reconciliation.
- BackupView: wire resolvedStatus throughout ringContentID, ringMainView,
ringColor, and actionButton; fix progress label to show pending-queue
denominator; handle .failed in onChange by reconciling and auto-resolving
to .completed when counts confirm all photos are safe.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Replace full [PhotoAsset] array enumeration with PHFetchResult batch
enumeration (autoreleasepool + Task.yield per batch) to keep memory
bounded during reconciliation. Introduce ManifestIndex with two O(1)
Set<String> lookups (localIdentifier + lowercased filename) instead of
O(n×m) linear scans. Scope manifest Data+struct inside buildManifestIndex
so they are released by ARC before the comparison loop begins. Add
UIApplication.didReceiveMemoryWarningNotification handler to cancel
in-flight tasks under memory pressure. Separate debounceTask from
refreshTask to avoid cancelling long-running reconciles on every photo
library event. fetchResultForReconciliation returns PHFetchResult
directly — no [PhotoAsset] array is ever allocated during reconciliation.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Swift does not allow async expressions inside ?? closures.
Replaced with explicit if-let branch so await is at statement level.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
