BackupJob: fix finish() — failedCount > 0 now correctly sets .failed
instead of .completed in both branches.
BackupEngine: replace filename-only fileExists check with a 3-layer
dedup strategy. For each asset: (1) check ManifestIndex by localIdentifier
O(1); (2) filename fallback for bootstrap manifests; (3) NAS fileExists
for files not yet in manifest. Never overwrite an existing NAS file.
Manifest index is built once after connect and held in a local let for
the loop — Data+BackupManifest are released immediately after.
BackupView — ring color:
active (running/preparing/paused) → orange always
failed → destructive
needBackup == 0 && phoneTotal > 0 → green
default → neutral gray
Ring is no longer permanently green after .completed.
BackupView — CTA button:
Default color is always black (AppTheme.ink).
On .completed: briefly flashes green for 2.5 s then smoothly
reverts to black. ctaFlashGreen state drives the color.
BackupView — Already Safe invariant:
alreadySafeDisplayCount = min(base + uploadedFiles, phoneTotal)
during active backup; min(base, phoneTotal) otherwise.
Adding skippedFiles was removed — they are already counted in
snapshot.alreadySafe from the last reconcile.
notBackedUpDisplayCount is derived from alreadySafeDisplayCount to
keep the invariant alreadySafe + needBackup == phoneTotal.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Introduce ConnectionState enum (idle → authenticating → authenticated
→ destinationSelected → failed) replacing the old Bool isConnected flag.
The entire UI renders reactively from this single state value.
Authentication: vm.authenticate() drives the state, haptic feedback
fires on success, any field edit resets back to idle so the user always
knows their current auth is stale after editing.
Connected banner: slides in below the credentials card after auth
showing "Connected to [host]" with a green dot and a Disconnect button
that resets state without clearing credentials.
Destination row: always visible at 40% opacity with a lock icon and
placeholder text "Connect to your NAS first" — activates to full opacity
with chevron and browsable state after auth. Green border + subtitle
"Backup destination ready" appears after selection. Taps blocked via
allowsHitTesting until authenticated.
CTA progression:
idle/failed → "Connect" (enabled when fields filled)
authenticating → spinner, disabled
authenticated → "Choose Destination" (opens folder browser)
destinationSelected → "Get Started" in green → navigates to dashboard
After folder browser dismissal, confirmDestination() writes the path
to ConnectionStore and fires a light haptic. Navigation to MainTabView
happens only when state == .destinationSelected.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Remove slide-in animation — destination row is always visible but
dimmed (opacity 0.45, taps blocked) until credentials are verified.
On successful auth it becomes fully active, green border appears
once a valid path is chosen.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Replace the SF Symbol server.rack with the custom KisaniLogoMark
extracted into a shared component used by both ConnectView and BackupView.
Introduce ConnectStep enum (credentials → folder → ready) in
ConnectViewModel. The primary CTA changes label and colour at each
step: "Connect" → "Select Destination" → "Get Started". The folder
row animates in only after successful authentication; its border goes
green once a valid path is chosen. Status message updates live with
the current step. Submitting the password field triggers verify().
Rename project.yml name to Kisani so xcodegen produces Kisani.xcodeproj.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
foregroundStyle(_:) on Text with a ShapeStyle requires iOS 17;
replace with foregroundColor for the two Text-concatenation nodes
in the refresh status row to stay compatible with the iOS 16 target.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Replace full [PhotoAsset] array enumeration with PHFetchResult batch
enumeration (autoreleasepool + Task.yield per batch) to keep memory
bounded during reconciliation. Introduce ManifestIndex with two O(1)
Set<String> lookups (localIdentifier + lowercased filename) instead of
O(n×m) linear scans. Scope manifest Data+struct inside buildManifestIndex
so they are released by ARC before the comparison loop begins. Add
UIApplication.didReceiveMemoryWarningNotification handler to cancel
in-flight tasks under memory pressure. Separate debounceTask from
refreshTask to avoid cancelling long-running reconciles on every photo
library event. fetchResultForReconciliation returns PHFetchResult
directly — no [PhotoAsset] array is ever allocated during reconciliation.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Swift does not allow async expressions inside ?? closures.
Replaced with explicit if-let branch so await is at statement level.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Section order: Connection Status → Current Session (live, when active) →
Errors → Last Successful Backup → Sync Activity → History → About
Connection Status:
- NAS row shows remotePath as third subtitle line (destination trust signal)
- Wi-Fi Offline badge now orange (was muted grey)
Current Session (new):
- Shows only when backup is active (preparing/running/paused)
- Progress bar, file count, live upload speed, ETA, current filename
- Badge colors: blue for uploading, orange for paused/scanning
Last Successful Backup (new):
- Trust signal always visible — shows date + total photos safe
- Empty state if no clean backup yet
Errors section:
- "Retry Failed" button in header (disabled while active or NAS unreachable)
- Error rows show count + uploaded count as context
- Error detail sheet: Retry Failed Uploads button disabled with reason when NAS is down
Sync Activity:
- Clear button opens confirmationDialog: Clear Completed Logs / Clear Errors / Clear Everything
- Labels: "Backups completed" / "New uploads" / "Already safe" / "Errors"
- ConnectionStore: clearCompletedHistory() and clearErrorHistory() added
History rows:
- "skipped" replaced with human-readable text:
"X already backed up", "X new · Y already safe", "X photos backed up"
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
- NAS reachable → green "Connected" (TCP ping = usable, not a warning state)
- NAS offline → orange "Offline" (matches color rule: orange = not reachable)
- NAS icon changed from externaldrive to server.rack
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
- Wi-Fi row: title always "Wi-Fi", subtitle shows SSID or Cellular/Not connected;
badge is Connected (green) / Cellular (amber) / Offline (muted) — no more
contradictory "No Wi-Fi" title with "Wi-Fi connected" subtitle
- NAS badge: Reachable now amber (TCP ping only, not auth-confirmed), Offline red,
Unknown muted — removes misleading green on unverified NAS connectivity
- Error rows are now tappable; chevron affordance + ScaleButtonStyle; opens detail
sheet with date, counts, duration, NAS host, trigger type, and suggested fix steps
- Sync Activity section: Clear button with confirmation alert (warns about error count
if errors exist), calls store.clearHistory()
- BackupViewModel: compareWithNAS() computes accurate pre-scan alreadySafeCount /
notBackedUpCount by matching lowercased filenames against NAS directory listing
- BackupView: ring shows state-based content (idle: not-backed-up count, running: %,
completed: checkmark), pill-style page indicator, display counts update live during
backup run, loadNASAndCompare() called on appear
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Generated at 9 sizes for iPhone home screen and App Store (1024px).
White server.rack SF Symbol on black rounded bg — matches in-app logo.
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
- safeAreaInset pins Connect/Continue button to screen bottom,
eliminating dead space below the form
- UGreenCompatibilityBadge now takes selectedProtocol param:
green dot + green SMB label when SMB selected,
grey dot + grey SFTP label when SFTP selected
Co-Authored-By: Kutesir <kutesir@provoc.ug>
Co-Authored-By: Sentry <sentry@provoc.ug>
Light mode: white disk icon on black bg
Dark mode: black disk icon on white bg
No green — uses AppTheme.ink + AppTheme.inkInverse throughout.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SF Symbol 'externaldrive.fill' renders reliably vs sparse PNG.
White icon on UGREEN green (#1FA462) background — crisp at all sizes.
kisani. weight: medium -> bold on login and connect screens.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The ugreen_logo.png is a black outline on transparent background.
Rendering it as .template (white) over UGREEN brand green (#1FA462)
makes it visible and on-brand on all three screens:
- LoginView: 90pt logo below kisani. wordmark
- ConnectView: 72pt logo replaces old Kisani title
- BackupView toolbar: 22pt chip with matching treatment
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reduce vertical padding from 10→6pt, drop large icons, shrink font,
value color now matches stat type (green/red/grey). Strip is ~40% shorter.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Drop com.apple.developer.networking.wifi-info from project.yml entitlements
and NSLocationWhenInUseUsageDescription from Info.plist
- SSID detection gracefully returns nil without the capability; all UI handles
nil SSID already via optional chaining
feat: branding, ring polish, sign-out UX, version/support
- LoginView: replace title with "kisani." monospaced wordmark + UGREEN logo,
show username then NAS display name after login
- BackupView: "kisani." + UGREEN logo chip in toolbar; ring color is orange
(in-progress), green (completed), destructive (failed), dim (idle)
- BackupJob: cap progress at min(1.0, ...) to prevent >100% display
- SettingsView sign-out dialog: two actions — "Sign Out" (lock only, keeps NAS)
and "Sign Out & Forget NAS" (full clear); clearer message
- SettingsView ACCOUNT section: App Version v1.0 + Support mailto rows
- AppMenuView: About section with kisani. wordmark, version, support link
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Asset fix:
- nas_logo_clean.imageset/Contents.json now registers the 512px PNG at
all three scales (1x/2x/3x) so iOS uses it on every device type.
Previously only 1x was wired causing the image to be missing on Retina.
- Logo rendered with thin AppTheme.inkQuaternary ring overlay so its
dark-background edge stays legible against any app background color.
LoginView overhaul:
- New hierarchy: Kisani title → 90pt logo → NAS displayName → username
- Staggered spring entrance (0.06–0.32s delays, asymmetric ease)
- "Switch User" replaces "More options" — calls store.signOut() to
clear connection/session/onboarding and return to ConnectView.
- MoreOptionsSheet removed (no longer needed).
ConnectionStore:
- Added lock() — ends session but preserves saved connection (returns to
LoginView for Face ID re-auth without losing NAS credentials).
- signOut() now clearly documented as clearing everything.
- Removed duplicate sectionLabel() from SettingsView (canonical version
lives in LANTriggerSection.swift as a top-level free function).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Rename app to Kisani in all UI text and Face ID prompt
- Replace flat 2-state RootView with 5-step flow: ConnectView →
LoginView → FolderSetupView → PhotoPermissionView → MainTabView
- Remove NavigationStack from LoginView (was causing nested-stack crash);
drive navigation via ConnectionStore.isSessionActive
- Add FolderSetupView and PhotoPermissionView onboarding screens with
step indicator (2/3, 3/3), spring entrance animations, and UGreen
connection chip
- Fix dark mode button invisibility: PrimaryButtonStyle and PillButtonStyle
now use AppTheme.inkInverse; GhostButtonStyle border uses ink.opacity(0.25)
- Add AppTheme.inkInverse adaptive token (dark bg ink on dark, white on light)
- Add ConnectionStore.isSessionActive (non-persisted) and
onboardingPhotoShown (UserDefaults-persisted)
- Add os_log logging in LoginViewModel at auth start/success/failure
- Remove dead Help button from ConnectView
- UGreenCompatibilityBadge, KeychainStore, SavedConnections, extensions,
PrivacyInfo.xcprivacy, unit test target and test stubs
- AppTheme: full UIColor dynamic provider tokens for dark/light adaptive color
- AppearanceMode enum + segmented picker in SettingsView
- BackupView: enlarged ring, removed options card and linear progress bar
- HistoryView: duration and bytes formatting, improved typography hierarchy
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
UGreen UGOS exposes personal folders as named SMB shares (e.g.
'personal_folder'). Third-party apps connect via SMB with the
UGOS username/password — no proprietary protocol involved.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Standalone IP field with hint labels below (matches UGreen connect pattern)
- Combined credentials card: username + hairline + password with show/hide eye
- Path field shows full absolute path (UGreen uses POSIX paths via SFTP)
- Default protocol changed from SMB → SFTP (UGreen absolute paths are SFTP-native)
- surfaceSunken background, protocol picker stays as secondary control
- Help button stub at bottom
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Wrap in a ViewModifier that guards with #available(iOS 16.4, *),
keeping the rounded sheet on 16.4+ while compiling clean on 16.0+.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Re-ran xcodegen so ButtonStyles.swift is included (fixes PrimaryButtonStyle
and ScaleButtonStyle not in scope in LoginView and LANTriggerSection)
- BackgroundTaskManager: access BackupEngine.shared inside @MainActor Task
instead of nonisolated context
- SFTPService: change var buffer → let (never mutated)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
